22
IMPORTANT INFORMATION
IMPORTANT: PLEASE READ THESE DIRECTIVES
TO ENSURE YOU GET THE BEST OUT OF YOUR MACHINE
Clean machine with damp cloth or wipes. Never rinse
or submerse.
Ensure the Filter is correctly fitted and clean before use.
Ensure that your cable and machine is not damaged.
Your machine will require a 14 month LEV test to ensure
the extraction and filtration quality of your machine.
This is the owner’s responsibility.
*
Always use the machine with a genuine V-TUF bag to ensure
that you safely collect, contain and dispose of the dust.
Disconnect machine from the power supply before repairing,
modifying and when not in use.
Operators must be sufficiently inducted on the use of
this machine before use.
Routine and preventative maintenance must be performed
on this machine to ensure safety and best performance.
Inspect the vacuum before and after use for damage.
And damaged parts must be replaced with original parts.
Store the machine inside and in a dry place.
If your machine stops working or gets blocked, disconnect
from power source before clearing or repairing your machine.
Resume operation only once the blockage has been cleared
or the relevant maintenance and tests have been done.
A risk assessment should be carried out to determine if
any PPE (Personal protective Equipment) should be worn
in conjunction with the use of this machine and whether
the waste needs to be disposed of in a controlled manner.
NEVER use your extractor without a filter.
This is a dry dust machine. Do not use for liquid, hot debris,
acids or solvents.
This machine is not to be used, maintained or tampered
with by children or people with reduced mental or physical
capabilities unless instructed or supervised.
This machine is not suitable for use with poisonous,
combustible or explosive dust.
Keep the machine, cable and accessories away from heat
and sharp or abrasive materials.
This machine must not be stored outside where it is
exposed to the elements (sun, frost, rain, etc.).
Never tow the machine by its cable.
THIS MACHINE HAS BEEN TESTED AND CERTIFIED
M-CLASS SO THAT IT PROTECTS THE OPERATOR
AND OTHER PEOPLE IN THE VICINITY FROM HARMFUL
AIRBORNE DUST. PLEASE READ AND UNDERSTAND
THE ‘M-CLASS’ INSTRUCTIONS TO GUARANTEE
SUFFICIENT PROTECTION (PAGE 23)
FAILURE TO ADHERE TO THE ABOVE DIRECTIVES
COULD LEAD TO DAMAGE OR HARM TO WHICH
THE MANUFACTURER HAS NO RESPONSIBILITY
*
Contact V-TUF if you would like us to assist you with this.
Specification & prices subject to change without prior notice. Images for illustration purposes only. © Fenco Group Ltd 2018 E&O.E
CONTACT:
CROFTON DRIVE, ALLENBY INDUSTRIAL ESTATE, LINCOLN, LN3 4NR, ENGLAND
VISIT
WWW.V-TUF.COM
FOR MORE INFORMATION
QUESTIONS?
PLEASE CONTACT OUR
TECHNICAL HELPLINE:
+44(0)1522 515767
(OPEN 9AM-4PM WEEKDAYS EXCLUDING HOLIDAYS)
