PC-250+ Quick Start Guide
D291720.1a
Page
1
of
2
Rev.
1,
5/21/17
This quick start guide provides basic setup and operating instructions for the PC-250+. The intended use of the PC-
250+
is to count taped reels of individually sealed components. Use of this equipment in any other way is not
recommended.
Work Area:
The PC-250+ is designed to be operated in a temperature-controlled, light industrial setting. The
machine should be installed on a flat, dry, stable surface in a well-lit area. Choose a table that is at least 36” wide by
18” deep to provide sufficient space for the assembled machine.
1.
AC Power Receptacle
2.
Power Switch
3.
Pitch Setting Guide
4.
LED Display & Controls
5.
Tape Adjustment Guide
6.
Idler Wheel
7.
Reel Arm Cranks
Physical Specifications:
Height:
12 inches (30 cm),
Width:
30 inches (76 cm),
Depth:
16 inches (40 cm),
Weight:
14.5 pounds (6.4 kg)
Power Required:
120/230 VAC, 50-60 Hz, Four AA batteries allow portability
Operating Environment:
Operating Temperature: 0°C - 50°C (32°F - 122°F), Maximum Humidity:
90% non-condensing
Only qualified personnel with the proper technical training, experience working on this
type of equipment and awareness of the possible hazards should perform
maintenance on the PC-250+.
The user is protected from moving parts and exposure to objects being ejected under
pressure by a metal enclosure. The PC-250+ should never be operated with the
enclosure removed. There are no internal parts that can be serviced by the user.
Always connect the power cord to the machine before plugging it into an outlet.
Detailed User’s Guides which include maintenance instructions, spare parts lists and troubleshooting information
are available on the V-TEK, Inc. website:
www.vtekusa.com
.
Contact Information
V-TEK, Inc.
751 Summit Ave
Mankato, MN 56001
TEL:
(507) 387-2039
website:
http://www.vtekusa.com
email:
1
2
3
4
3
6
5
7
7
5
6
