V-TAC VT-6053-5 Instruction Manual Download Page 1

SAFETY INSTRUCTIONS

• Make sure that the mains voltage matches the voltage stated on the rating label of the 

appliance.

• Check the power cord regularly for visible damage. If the cord is damaged, it must be 

replaced by the official Technical Support Service, in order to avoid any type of danger.

WARNING: 

Do not use the appliance if its cord, plug, or housing is damaged, nor after it 

malfunctions or has been dropped or damaged in any way.

• The appliance is not intended to be used by children under the age of 8. It can be used by 

children over the age of 8, as long as they are given continuous supervision.

• This appliance is not intended to be used by persons with reduced physical, sensory, or 

mental capabilities, or lack of experience or knowledge, unless they have been given supervi-

sion or instruction concerning the use of the appliance in a safe way by a person responsible 

for their safety, and understand the hazards involved.

• Supervise young children to make sure that they do not play with the appliance. Close 

supervision is necessary when the appliance is being used by or near children.

• Keep the appliance and its cord out of reach of children under the age of 8. 

• Do not try to repair the appliance by yourself. Contact the official Technical Support Service 

for advice.

• Cleaning and maintenance must be carried out according to this instruction manual to make 

sure the appliance functions properly. Turn off and unplug the appliance before cleaning it.

• Make sure the fan is not placed near drapes, curtains, or any objects that may be drawn into 

the fan.

• The minimum distance between the fan blades and the floor must be 2.3 m. The minimum 

carrying capacity of the outlet box from which the fan is hung must be 45 kg.

Summary of Contents for VT-6053-5

















Reviews: