CAUTION
• The product must only be installed by an authorized electrician and in compliance with local,
regional and state electricity regulations.
• Check if the electricity specification of this device are compatible with your installation.
• Turn off the power before installing or repairing the fan.
• The fan must be properly grounded to avoid the risk of electric shock.
• Use and unauthorized technical modifications could suppose a risk of injury.
• Should be 220V as per the specifications.
• Do not connect the fan motor to a current dimmer. It could give unsatisfactory performance
(engine humming) and cause engine damage.
• Be careful while working near the spinning blades.
• The fan must be installed so that the blades are at least 2, 3 meters above the ground.
• The fan must be hung from a structure capable of supporting a weight of at least 50 kg. The
fixture must be able to support the weight of the fan in motion and should not wobble or
loosen.
• Make sure that the blades do not come in contact with any object at the installation site.
Always leave a minimum clearance of 50cm from the tip of the blades to the wall or ceiling.
• Keep in mind that the larger the space, the better the fan’s air flow will be.
• This device is designed for indoor use only. Do not use in an open space or where it may be
exposed to water or moisture.
• Never install the appliance in a room with a high degree of humidity.
• The fan must not be started in a room with a gas appliance running at the same time.