V-Bro Products Garage Gator GGR220, Installation And Operating Instructions Manual

Page: 14 / 19

14 14
14
Step 8
Assemble the hook bar
ƒ
Assemble the three middle pieces of the hook bar by lining up the spring clips
from the hook bar center (E) to the holes of the hook bar connectors (F).
(SEE FIG. 8A)
ƒ
Slide hooks (H) and bike cables (I) onto the assembled piece. (SEE FIG. 8B
& 8C)
ƒ
Attach each hook bar end (G) to the assembled middle section by lining up
the slotted holes from the hook bar end to the holes of the hook bar
connectors.
(SEE FIG. 8D)
Step 9
Attach the hook bar to the cables
ƒ
Attach the hooks at the end of the cables to the
hook bar by pressing in the spring clip and inserting
the hook into the opening on the hook bar.
(SEE
FIG. 9) . Insert each hook so the spring clip on the
hook is pointing toward the hook bar center (E).
NOTE: You may wish to slide a hook or bike cable to
the hook bar end sections – the area on the
far side of the hook – before attaching the
hook to the bar.
Be sure the spring
clips are fully
inserted into the
connector bars.
! WARNING
FIG. 8A
FIG. 8B FIG. 8C
FIG. 8D
FIG. 9