UWT Rotonivo RN 4000 Series Technical Information/Instruction Manual Download Page 1

Page: 1 / 20

page

Level limit switch

Series RN 4000

Technical information / Instruction manual

Table of contents

Page

Safety

notes/

Technical

support

---------------------------------------------------------------------------------------------------------

Introduction

---------------------------------------------------------------------------------------------------------

Function

---------------------------------------------------------------------------------------------------------

Technical

data

---------------------------------------------------------------------------------------------------------

Approvals 8

---------------------------------------------------------------------------------------------------------

Options

---------------------------------------------------------------------------------------------------------

Mounting 10

---------------------------------------------------------------------------------------------------------

Electrical

installation

---------------------------------------------------------------------------------------------------------

Signal

and

Alarm

output

---------------------------------------------------------------------------------------------------------

Settings

sensitivity

---------------------------------------------------------------------------------------------------------

Maintenance

---------------------------------------------------------------------------------------------------------

Notes for use in Hazardous Locations

-------------------------------------------------------------------------------------------------------

Disposal

Subject to technical change

We assume no liability for typing errors.

All dimensions in mm (inches).

Different variations than specified are possible.

Please contact our technical consultants.

RN 4000

gi010121

Rotonivo

Summary of Contents for Rotonivo RN 4000 Series





















Search results

Summary of Contents for Rotonivo RN 4000 Series

Reviews:

Related manuals for Rotonivo RN 4000 Series

Brands by name

Popular brands

UWT Rotonivo RN 4000 Series, Technical Information/Instruction Manual

Search results

Summary of Contents for Rotonivo RN 4000 Series

Reviews:

Related manuals for Rotonivo RN 4000 Series

Brands by name

Popular brands