NivoRadar
®
Continuous level measurement
Series NR 4000
Technical information / Instruction manual
page 16
Mounting
General instructions
The instrument is suitable for standard and extended ambient con-
ditions acc. to DIN/EN/IEC/ANSI/ISA/UL/CSA 61010-1. It can be
used indoors as well as outdoors.
Note:
For safety reasons, the instrument must only be operated within the
permissible process conditions. You can find detailed information
on the process conditions in chapter " Technical data" of
the operating instructions or on the type label.
Hence make sure before mounting that all parts of the instrument
exposed to the process are suitable for the existing process condi-
tions.
These are mainly:
•
Active measuring component
•
Process fitting
•
Process seal
Process conditions in particular are:
•
Process pressure
•
Process temperature
•
Chemical properties of the medium
•
Abrasion and mechanical influences
Mounting versions
For the wall mounting, a mounting bracket with opening for thread
G1 is recommended. The mounting of the device in the bracket is
carried out via the supplied G1 counter nut of plastic. Take note
of chapter " Mounting instructions" for the recommended
distance to the wall.
!PP
Fig. 8: Mounting via a mounting bracket
Ambient conditions
Process conditions
Mounting bracket
