Hallett Instruction Manual
Released on 8-Aug-19
– GH2B
Page 6
UV Pure Technologies Inc. © 2019
2.
I
MPORTANT
S
AFETY
I
NSTRUCTIONS
When operating the Hallett unit, basic precautions should always be followed,
including the following:
1. Read the entire instruction manual before installing or operating the
system.
2. Pay attention to all warning and caution statements, and also safety
symbols throughout these instructions. Failure to do so may result in
personal injury and/or damage to equipment.
3. To reduce the risk of injury, close supervision is necessary when the
UV unit is used near children or infirm persons.
4. Do not contact moving parts.
5. Only use attachments or spare parts recommended or sold by UV
Pure.
6. The unit is intended only for indoor use in a dry location.
7. Do not unplug the unit by pulling on cord. To unplug, grasp the plug,
not the cord.
8. Unplug the unit from the outlet when not in use and before any
servicing or cleaning.
9. The UV chamber contains an interlock to disable the UV lamps if the
event the chamber is accessed when the power is on. Do not defeat
its purpose or attempt to service without opening the panel
completely.
10. Do not operate the unit with a damaged cord or plug, or after a
significant malfunction or is dropped or damaged in any manner.
Return the unit to the nearest authorized service facility for
examination, repair, or electrical or mechanical adjustment.
11. Connect the unit only to a circuit that is protected by a ground-fault
circuit-interrupter (GFCI). See Grounding Instructions.
12. If an extension cord is necessary, the cord should contain a ground
and be rated for the same amperage as the unit or combined units.
13. Do not plug in the unit if water is present on the unit or if any nearby
piping connections are leaking.
14. Service to the unit does not require the removal of the aluminum
endplates and they must remain assembled.
15. In the event of an alarm or shut down of the UV unit and water
continues to flow either accidentally or for emergency purposes, or if
the UV system is bypassed, it is recommended that any water used
for drinking be boiled.
16. Do not operate the unit dry.
17. SAVE THESE INSTRUCTIONS and the purchase receipt for the
unit.
GROUNDING INSTRUCTIONS
This UV unit must be grounded. In the event of a malfunction or breakdown,
grounding will reduce the risk of electric shock by providing a path of least
resistance for electric current. This unit is equipped with a cord having an
appliance-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is installed and grounded in
accordance with all local codes and ordinances. The piping connected to the
Summary of Contents for Crossfire Technology Hallett 1000NC
Page 50: ...Hallett Instruction Manual Released on 8 Aug 19 GH2B Page 50 UV Pure Technologies Inc 2019...
Page 51: ...Hallett Instruction Manual Released on 8 Aug 19 GH2B Page 51 UV Pure Technologies Inc 2019...
Page 52: ...UV Pure Technologies Inc 455 Milner Ave Unit 1 Toronto Ontario M1B 2K4 www uvpure com...