14
9. Software Usage
The software will be installed in a directory named "pgnano", while the UUGear Web Interface will be
installed in a directory named
“uwi”. You can run the software by running the PiGearNano.sh script:
You will see the software interface like this:
pi@raspberrypi
:~ $
cd pgnano
pi@raspberrypi
:~/pgnano $
./PiGearNano.sh
================================================================================
| |
| PiGear Nano - Nano-ITX Raspberry Pi Compute Module 4 Carrier Board |
| |
| < Version 1.00 > by Dun Cat B.V. |
| |
================================================================================
1. Realtime Clock [Tue 28 Dec 2021 17:18:45 CET]
2. Analog Inputs (ADC)
3. Digital Inputs
4. Digital Outputs
5. Configurable Digital Inputs/Outputs
6. Programmable LED Test
7. Buzzer Test
8. Exit
Please choose 1~8:
Summary of Contents for PiGear Nano
Page 5: ...2...
