UTStarcom XV6600, User Manual, Page: 116 / 188

XV6600 User Manual 108
Messaging Features
XV6600 User Manual 109
Messaging
Features
You can set up a connection to an e-mail server so that you can send and receive e-mail
messages by using a modem or network connection and Inbox on your device.
The ISP or network must use a POP3 or IMAP4 e-mail server and an SMTP
gateway.
You can use multiple e-mail services to receive your messages. For each e-mail service
you intend to use, first set up and name the e-mail service. If you use the same service
to connect to different mailboxes, set up and name each mailbox connection.
To set up an e-mail service:
1
Open Messaging on your device, then tap Accounts → New Account .
Follow the directions in the New Account Wizard .
2
Fill in your e-mail address then tap Next .
Tapping Next will initiate auto-configuration, which attempts to connect your
XV6600 to your e-mail server and automatically download the necessary e-mail
connection settings.
n
If auto-configuration is successful, you can immediately begin sending/
receiving e-mail.
n
If auto-configuration is unsuccessful, you will need to manually enter the
settings.
3
Enter Your name , User name and Password , then tap Next .
4
From the drop down menu select the Account type that your e-mail provider
supports ( POP3 or IMAP4 ).
5
Enter a Name for your e-mail account then tap Next .
8.1 E-mail Messages: Using Messaging