Unpacking and Handling
Page 15 of 28
4.3
Removing the CryptoServer Se
You will need to remove the CryptoServer Se to change its battery or to store or transport it.
Follow the instructions for removing PCIe plug-in cards as specified in the operating manual
for your computer.
1.
Switch off the computer.
2.
Unplug all cables.
3.
Open the computer case.
4.
Remove the CryptoServer Se carefully from the PCIe slot. You must never use a tool (for
example, screwdriver) to lever the card out of the slot.
5.
Close the computer case.
6.
Reconnect all cables.
Please note that the heat sink of the CryptoServer Se remains very hot for quite a while after
you have switched off the computer. Please allow the heat sink to cool down first before you
remove the CryptoServer Se.