Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
For Assistance Call: 800-237-7806
Visit us at:
www.utilimaster.com
98
Reach—Body Service Manual
E-mail:
Windshield Installation
NOTE: Recommended minimum thickness of adhesive layer after installation is 1/4".
1. Install glass onto vehicle and align to correct
position using the support blocks.
2. Press gently around the entire perimeter of glass
to make a good adhesive contact. Use the
Poly-stick to clean up any excess adhesive.
3. Clean area with a mild soap solution (use
sparingly).
4. Secure top of leaf screen with six M4 screws.
5.
Torque to 15–25 ft•lbs.
6.
Secure bottom of leaf screen with five #8 Phillips
head screws.
7. Install wiper arms.
8. Install hood.
9. Install A-pillar trim.
Install glass
CAUTION: Glass must be installed within ten minutes of applying adhesive to ensure a good bond.
CAUTION: Do NOT use mineral spirits or alcohol.
CAUTION: Do NOT wash the windows for at least 24 hours following installation. Chemicals like
those found in washer fluid can retard the adhesives.