![Utilimaster REACH Service Manual Download Page 66](http://html.mh-extra.com/html/utilimaster/reach/reach_service-manual_1065305066.webp)
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
For Assistance Call: 800-237-7806
Visit us at:
www.utilimaster.com
66
Reach—Body Service Manual
E-mail:
Adjustment
1. Check that the door has no more than 1/4" maximum play, does NOT bind in the track, and is
centered in opening.
2. Add or subtract washers on roller shafts to achieve proper door operation. A maximum of four
spacer washers should be at the second from top joint roller and the second from bottom joint
roller on each side.
3. Loosen both bolts on slides located at top of door to adjust top panel in and out.
4.
Loosen both locknuts on catches located at bottom of door so that it sits flush on threshold.
Slide bolt location
Catch locknuts location
Door roller