Utilimaster Corporation attempts to provide
information that is accurate, complete, and
useful. All information contained in this
manual is based on the latest product infor-
mation available at the time of publication.
However, because of the Utilimaster policy
of continual product improvement, Utilimas-
ter reserves the right to amend the informa-
tion in this document at any time without
prior notice.
This material is confidential and the prop
-
erty of Utilimaster. It is shared with your
company for the sole purpose of helping you
with the operation of the described equip-
ment.
Utilimaster makes no warranty of any kind
with regard to this material, including, but
not limited to, the implied warranties of
merchantability and fitness for a particular
purpose. Utilimaster shall not be liable for
errors contained herein or for incidental or
consequential damages in connection with
the furnishing, performance, or use of this
material.
Utilimaster expressly disclaims all respon-
sibility and liability for the installation, use,
performance, maintenance, and support of
third-party products. Customers are advised
to make their independent evaluation of such
products.
No part of this document may be photo-
copied, reproduced, or translated to another
language without the prior written consent
of Utilimaster.
Utilimaster Corporation attempts to provide
information that is accurate, complete, and
For Assistance Call: 800-237-7806
Visit us at:
www.utilimaster.com
182
Reach—Body Service Manual
E-mail:
Lubrication
Lubricate hinges, latches, seals, and locks as described in the body maintenance checklist.
See
Body Maintenance Checklist.
Manufacturers’ Recommendations
Safety, application, and operation instructions provided by the manufacturer with sealants, adhesives,
cleaners, and other equipment should always supersede information provided by Utilimaster.
Maintenance Checklist
By design, the Utilimaster body is low maintenance. However, Utilimaster recommends the items on
the following pages should be checked every three to four months, unless otherwise stated.
For more detailed service instructions, see the More Information and Publications section on how to
download/order the Utilimaster service manuals.
The daily inspection checklist should be included with every periodic inspection. See the "
Before You
Go
" Operation Inspection section.
Body Mounting Fasteners
❑
Check for loose fasteners underneath the
chassis, particularly the bolts that mount the
body to the chassis.
Bumpers
❑
Check for loose bolts on the bumper and
brackets.
❑
Check for damaged or bent components.
❑
Lubricate the rear shock-absorbing bumper
fittings with #2 grease (one shot from a hand
pump every three to six months, depending
on use and conditions).
Rear shock-absorbing bumper grease fittings
Body mounting bolts
Rear shock-absorbing bumper
