Left
view
Panel
Diagram
Please follow installation steps as below:
Please check the following items before installation, if anything missing, please contact the
dealer .
Ethernet Extender( SV unit
)
1 PC
Ethernet Extender( IPC unit
)
1 PC
User Manual 1 PC
1) Turn off the power of all related devices before the installation, otherwise the device would
be damaged;
2) SV unit:The RJ45 port is connected with PoE switch(PSE device) by cat5E/6, and the
Coax port is connected by coaxial cable;
3) IPC unit:The RJ45 port is connected with PoE camera(PD device) by cat5E/6, and the
Coax port is connected by coaxial cable;
5) Check if the installation is correct and device is good, make sure all the connection is
reliable and power up the system;
6) Make sure the network is working.
Features
Using a single coaxial cable to transmit bidirectional Ethernet signals and power, the
transmission distance of up to 300m (100Mbps) ,500m(10Mbps);
Support
, IEEE
802
.
3u, IEEE
802
.
3af, IEEE
802
.
3at
standard;
IEEE802
.
3
Differential mode 4KV lightning protection design, greatly improving equipment stability;
Plug
and
play,
no
other software and transfer agreement needed;
Built-in splicing slot, with magnet and hanger, unique and integrated design, splicing,
desktop and wall-mounted installations available, which suits in all kinds of engineering
installation.
PoE Ethernet Extender
User Manual
Notice
1
2
1) Please use RG59 or above coaxial cable and Cat5e/6 cable to reach the longest
transmission distance;
2) Please use the standard coaxial
connector to avoid abnormal display
.
Installation
steps
Application
IPC U
nit
SV
-U
nit
PoE I
P
Cam
era
L
CD
NVR
PoE
Sw
itch
R
G5
9
Co
axia
l c
able
300
m
Ca
t5e
/
6
PoE Ethernet
Extender
IPC Unit Device
SV Unit Device
Right
view
Left
view
Top view
Coax port
Input Power LED
Coax Link/Act LED
POE OUT
POE OUT
Mode
Output Power LED
Mode
Right
view
Top view
POE IN
Up to 300 meters
Up to 300 meters
The product
is an Ethernet extender which can transfer Ethernet signal and power by UTP
cable or coaxial cable. It consists of SV unit and IPC unit. This product is specially designed
to meet the power supply in the long-distance HD IP transmission and accord with IEEE
802.3af
and
IEEE 802.3at standard.
This device can transfer the Ethernet signal and power
up to 300m through the coaxial cable, But network latency is less than 20us.The structure
designing of built-in splicing slot on both sides and
magnetic attraction as well as hanger on
the bottom enables multiple installation methods of splicing, adsorption , and wall-
mounting.So it is a cost-effective choice for the HD network surveillance system,
transmission and application of the IOT, as well as upgrading and renovating
projects
.
Coax port
Coax Link/Act LED
100Mbps mode: the IPC and SV unit’s Mode switch must at the 100M;
10Mbps mode: the IPC and SV unit’s Mode switch must at the 10M;
If the IPC unit and SV unit are not the same mode status,they can not work!
