Please follow the below installation steps
Please check the following items before installation, if it is missing, please contact the
dealer .
4 ports PoE Ethernet Switch 1pc
Power adaptor 1pc
AC power cable 1pc
Accessory 1pc
User manual 1pc
1) Please turn off the signal power and display device power before installation, installation
with power will damage the transmission equipment;
2) Use network cable connect PoE IP camera and 1～4 downlink ports of product respectively;
3) Use fiber connect equipment uplink optical port and uplink equipment’s(optical converter)
optical port, please notice that the fiber port RX and TX need cross-linking .
4) Connect power adapter;
5) Check if the installation is correct, equipment is in good condition, the connection is stable,
then provide power for system;
6) Ensure the Ethernet equipment with power and work properly.
Feature
4 Ports PoE Ethernet Switch
4 Ports PoE Ethernet Switch
User Manual
1
2
4 ports PoE Ethernet Switch is a surveillance security Ethernet Switch which aims at Ethernet
high definition surveillance, Ethernet project security system. The product fully combines the
characteristic of surveillance security, provides fast packet forwarding ability and abundant
backplane bandwidth, which ensures clear image and fluent transmission. ESD and surge
protection circuit can improve product stability. The product supports one key CCTV model,
can achieve VLAN, control the Net storm, protect the information security, prevent the viral
transmission and Ethernet attack, fully satisfy the Ethernet video surveillance security system
and Ethernet project needs.
VerB 1.3
● Major ports: 1 pcs 100Mbps uplink optical port, 4 pcs 100Mbps down link Ethernet
ports , every port supports MDI/MDIX;
● Special function: One key CCTV model;1～4 downlink ports can only communicate
with uplink ports;
● Power input: DC48V～57V;
● Transmission Distance : Ethernet port 0～100m，the furthest transmission distance
could reach 250m in CCTV model; Optical port 20km;
● Standard: Meet IEEE802.3 ,IEEE802.3u,IEEE802.3 af/at standards, PoE use
End-Span, the spare cable can be of other use;
● Protection: Excellent anti-thunder, anti-static and anti-interference ability;
● Appearance: Delicate design and easy installation, configure the anti-theft lock hole,
guard against theft;
●Operation: Plug and Play, No Setting required.
fiber
4 P
orts P
OE E
thern
et S
witc
h
Cat5
/5e/6 n
etwo
rk c
able
PoE IP camera
pow
er
Optic
al F
iber C
onve
rter
PoE IP camera
Application
Board
Diagram
Front board
CCTV mode
Power indicated light
Optical port
indicated light
PoE down link
Ethernet port
Uplink Ethernet port
Power input port
Ground
Kensington lock
Back board
Side board
Notice
The transmission distance is related to the connected cable. We suggest standard
Cat5e/6 network cable, so the transmission distance can up to furthest!
1
level will reduce; please use above No.20 wire to connect the grounding terminal.
2) Turn the dial switch for left, the equipment can enter surveillance mode after providing
equipment power.
) Device must be connected with lightning protection grounding; otherwise protection
Notice
NVR
Installation steps
PoE IP camera
