The product is a video, control signal and power surge protector device designed
according to the standard of GB/T18802.21-2004/IEC61643-21:200. The device
features multi-level protection、high capacity for through-flow、low limiting voltage、
quick reaction time、less insertion loss. It adapts to overvoltage protection for security
video signal and power, protecting the device from the damage of induced overvoltage,
switching overvoltage and static discharge. It’s widely used in security monitoring
system, environment monitoring system.
Surge Protector
Please check the following item before installation. If it's missing, please contact the
dealer
Surge Protector 1set
User Manual 1set
Installation Steps
1) Before inserting the protector into the system, please make sure the grounding grid
reach the specification;
2) please make sure the connection is stable;
3) Please make sure the grounding cable of the surge protector is as short as possible.
Installation
Steps
Board
Diagram
Power
,
Video
and
Data
Surge
Protector
Application
Notice：
1) Please make sure the connection is correct, otherwise it will cause the damage of the
surge protector.
2) Please make sure to check the plug if the consumption is increasing. you can re-
connect it or replace the surge protector
3) Please don't unpack the component personally.
Power,Video and Data 3 in 1 Surge Protector
Grounding
Coaxial Cable
Control Keyboard
Power Cable
UTP Cable
PTZ
Features
Standard: GB/T18802.21-2004/IEC61643-21:2000;
Protection: Baseband composite video signal(Bandwidth more than 10MHz)、12~24 AC
DC power;
Features: Multifunction multilevel overvoltage protection, large max discharge current,
low limiting voltage, quick reacting time, low insertion loss;
Grounding Mode: Extension Line to ground;
Design: Clear Logo, recognizable, aluminum shell, delicate size, easy installation;
1
2
Power
Surge Protector
M
on
ito
r
Notice
Please make sure the connection direction is correct.
Data Input
Video Input
Video Output
Data output
Power Input
Power output
Power LED
P
E
