The product is a video and power surge protector device designed according to the standard
of GB/T18802.21-2004/IEC61643-21:200. The device features multi-level protection、high
capacity for through-flow、 low limiting voltage、 quick reaction time、 less insertion loss. It
adapts to overvoltage protection for security video signal and power, protecting the device
from the damage of induced overvoltage, switching overvoltage and static discharge. It’s
widely used in security monitoring system, environment monitoring system.
Please check the following item before installation. If it's missing, please contact the dealer
Surge Protector 1 set
User Manual 1 set
Installation Steps
1) Before inserting the protector into the system, please make sure the grounding grid
reach the specification;
2) please make sure the connection is stable;
3) Please make sure the grounding cable of the surge protector is as short as possible.
Installation
Board
Diagram
Power
and
video
Surge
Protector
Notice:
1) Please make sure the connection is correct, otherwise it will cause the damage of the
surge protector.
2) Please make sure to check the plug if the consumption is increasing. you can re-connect
it or replace the surge protector
3) Please don't unpack the component personally.
Application
Features
Standard: GB/T18802.21-2004/IEC61643-21:2000;
Protection: Baseband composite video signal(Bandwidth more than 10MHz)、12~24 AC
DC power;
Features: Multifunction multilevel overvoltage protection, large max discharge current,
low limiting voltage, quick reacting time, low insertion loss;
Grounding Mode: Extension Line to ground;
Design: Clear Logo, recognizable, aluminum shell, delicate size, easy installation.
1
2
Video
Input
Video Output
Power
Input
Power
Output
CCTV
CAMERA
Coaxial
Cable
Power
Cable
Coaxial
Cable
Power
Cable
Surge Protector
Power
M
on
ito
r
Power
LED
Notice
Please make sure the connection direction is correct.
P
E
Grounding