Installation
step
1
Feature
Board diagram
SFP Socket
Optical Fiber Port
SFP
Optical
Module
1.25G
Single Optical
Fiber
20km
This is a standard SFP optical module. It uses a single mode optical fiber and the speed rate can up to
1.2 Gbps, transmission distance up to 20 km. This product need to use in pair and match up with
5
fiber
converter and optical Ethernet switch with SFP port, it can be used in Ethernet, telecom and optical
fiber
communication and other industries...
Use SFP packaging form, LC connector, support SFF8472 standard;
Support hot plug ;
The data transmission distance of single mode optical fiber can up to 20 km;
Data input and output ports are comply with the low voltage emitter coupled logic(LVPECL) standard;
Low electromagnetic interference to the environment, strong ESD protection;
Meet IEC-60825 laser safety standard;
Meet RoHS standard.
Transmitter use1310nm FP laser and 1550PIN-TIA;
Receiver use 1550nm FP laser and1310nm PIN-TIA;
Please check the following items before installation. If any missing, please contact the dealer.
1.25
G
S
ingle
Optical Fiber 20km 1pc
User manual 1pc
SFP Optical Module,
Please follow the following step
1)
2) Plug 1.25G single optical fiber 20km SFP optical module into SFP socket;
3)
4) Make sure the optical communication is normal.
the device;
Check if the installation is correct and device is good, make sure all the connection is reliable
and power up the system;
Please turn off the signal source and the device's power, installation with power on may damage
