UH-4VE: HDMI 2.0 1x4 Splitter w. Audio Breakout and Down- scaling
U.T.E. electronic GmbH & Co. KG
7
www.ute.de
6. Firmware Upgrade
Please follow the below steps to upgrade firmware by the Micro-USB port:
Step1.
Connect the splitter to the PC with USB cable.
Step2.
Power on the HDMI 2.0 1x4 Splitter UH-4VE, and then the PC will automatically
detect a U-
disk named of “BOOTDISK”.
Step3.
Double-click to open the U-
disk, a file named of “READY.TXT” will be showed.
Step4.
Copy the
latest upgrade file (.bin) to the “BOOTDISK” U-disk directly.
Step5.
If the filename “READY.TXT” automatically turns to “SUCCESS.TXT”, the
firmware was upgraded successfully. If the firmware upgrade failed, please
check the file (.bin) and then follow the above procedure to operate again.
Step6.
Remove the USB cable after firmware upgrade.
