29
Mask Homing
You can temporarily mask the navigation homing beacon to prevent your UDI-28™ from sounding a
homing alarm when a homing signal is transmitted. This allows you temporarily disregard the homing
signal until the time you need it to return to the boat unit.
NOTE:
Masking the homing beacon
does not
mask any SOS beacons that may be activated during a
dive.
To mask a homing beacon
:
1.
From the
Navigation
menu,
select
Mask Homing
and
press
Enter
.
NAVIGATION
2. Homing track
1. SOS track
3. Mask Homing
2.
In the
Mask Homing
menu,
select
Enable
to mask the
beacon and press
Enter
.
MASK HOMING
2. Disable
1. Enable
depth
max
dive time
15.4
32.0
25
UDI28
124
M
3.
When you enable
Mask Homing
,
a small
M
is shown in the lower right
corner of the display.
Care and maintenance
UDI-28™ requires very little care or maintenance.
After every dive
: wash and wipe down the UDI-28™ and make sure that the contacts are dry prior to
connecting the UDI-28™ to the charger or the PC.
Do not use a water jet or pressure from hose to clean the UDI-28, to prevent damage to the UDI-28™
mechanism.
Periodically
the UDI-28™ may need to be serviced at an authorized laboratory for calibration and
battery replacement (at least once a year). Consult the UDI-28™ webpage for information or with your
dealer.
