manualshive.com logo in svg

Utax PF 470, Service Manual

The Utax PF 470 Service Manual is a comprehensive and easy-to-follow user manual for this exceptional product. Available for free download at manualshive.com, this manual provides step-by-step instructions and crucial information to ensure efficient usage of the Utax PF 470. Enhance your experience with this invaluable resource today!

Share
Download
background image

3NN/3NP

1-5-1

1-5 Assembly and disassembly

1-5-1  Precautions for assembly and disassembly

(1) Precautions

Before starting disassembly, press the Power key on the operation panel to off. Make sure that the Power 
lamp is off before turning off the main power switch. And then unplug the power cable from the wall outlet.
When handling PWBs (printed wiring boards), do not touch parts with bare hands.
The PWBs are susceptible to static charge.
Do not touch any PWB containing ICs with bare hands or any object prone to static charge.
When removing the hook of the connector, be sure to release the hook.
Take care not to get the cables caught.
To reassemble the parts, use the original screws. If the types and the sizes of screws are not known, refer to 
the PARTS LIST.

Summary of Contents for PF 470




























































Reviews:

No comments

Related manuals for PF 470

Brands by name

Popular brands

Load more brands