Utax P-C2665 MFP User Manual Fax System Download

Page: 104 / 202

FAX Operation (Advanced)

4-46

Press [Select] (the

Right Select

key). The

selected original is indicated by a checkmark. To

cancel the selection, press [Select] (the

Right

Select

key) again.

Selecting Two or More Originals

Repeat steps 4 to 5.

Selecting/Cancelling All Originals

Press [Menu] (the

Left Select

key).

Press the





key to select [Select All] or

[Clear All].

Press the

key.

Press the

key.

Press the





key to select [Print].

Press the

key.

Press the

Start

key. Printing starts.

Deleting Originals in a Polling Box

Use this procedure to delete an original stored in a Polling box.

NOTE:

Delete TX File

is set to [On], originals are automatically deleted following polling transmission.

(

Refer to page 4-40

Follow steps 1 to 5 in

Printing from a Polling Box

on page 4-45

Press the

key.

Press the





key to select [Delete].

Press the

key.

Press [Yes] (the

Left Select

key). The original is

deleted.

Summary of Contents for P-C2665 MFP











































































































































































































Search results

Summary of Contents for P-C2665 MFP

Reviews:

Related manuals for P-C2665 MFP

Brands by name

Popular brands

Utax P-C2665 MFP, User Manual Fax System

Search results

Summary of Contents for P-C2665 MFP

Reviews:

Related manuals for P-C2665 MFP

Brands by name

Popular brands