Utax P-4531DN Operation Manual Download

Page: 203 / 352

4-125

Operation Panel

Parallel I/F (Parallel interface setting)

This blocks and protects the parallel interface.

In the

I/F Block Set.

menu, press





to select

Parallel

I/F

Press

[OK]

. The

Parallel I/F

screen appears.

Press





to select whether to block and protect the optional

parallel interface.

Press

[OK]

. The Parallel I/F setting is set and the

I/F Block Set.

menu reappears.

USB Storage (USB memory setting)

This blocks and protects the USB storage (USB memory).

In the

I/F Block Set.

menu, press





to select

USB

Storage

Press

[OK]

. The

USB Storage

screen appears.

Press





to select whether to block and protect the USB

memory.

Press

[OK]

. The USB memory setting is set and the

I/F Block

Set.

menu reappears.

Security Level

The Security Level setting is primarily a menu option used by service personnel for maintenance work. There is no need for
customers to use this menu.

Parallel I/F:

Unblock

Block

USB Storage:

Unblock

Block

Summary of Contents for P-4531DN

































































































































































































































































































































































Search results

Summary of Contents for P-4531DN

Reviews:

Related manuals for P-4531DN

Brands by name

Popular brands

Utax P-4531DN, Operation Manual

Search results

Summary of Contents for P-4531DN

Reviews:

Related manuals for P-4531DN

Brands by name

Popular brands