Utax P-4531DN Operation Manual Download

Page: 188 / 352

Operation Panel

4-110

Press





to select which function to set.

Press

[OK]

. The screen for the function selected is displayed.

Press





to select whether or not to use Energy Saver mode.

Select

to set the Energy Saver mode.

Press

[OK]

. Set the Energy Saver mode for each function and

Status

menu reappears.

Sleep Timer (Sleep timer timeout time)

Set amount of time before entering Sleep. The printer reverts to normal operation mode when the printer receives a print
job,

[OK]

is pressed or one of the exterior covers is opened.

In the

Timer Setting

menu, press





to select

Sleep Timer

Press

[OK]

. The

Sleep Timer

screen appears.

Use the numeric keys or





to set the sleep time.

The timer can be set between 1 and 120 min (for Europe) or 1 and
240 min (except for Europe).

Press

[OK]

. The sleep time setting is stored and the

Timer

Setting

menu reappears.

Power Off Rule (Power Off Rule setting) (for Europe)

The Power Off Rule is used to stop the power from automatically turning off when the machine is in certain states or certain
settings are in effect. Rules that can be set and their initial settings are as follows:

Network:

Off

Note

Repeat steps 9 to 12 to set Energy Saver mode for a

different function.

Sleep Timer:

(1 - 120)

min.

Item

Default Value

Network (Network interface setting)

Off

USB Cable (USB interface setting)

Off

USB Host (USB memory slot setting)

RAM Disk (RAM Disk Mode setting)

†

If the Power Off Rule is previously set to

, the machine turns off the power and all the data stored in the RAM Disk is

deleted.

NIC (Option Network Interface Kit (NIC) setting)

Off

Parallel I/F (Parallel interface setting)

Off

Note

When

is set it automatically turns off.

NIC

is only displayed when the optional Network Interface Kit (IB-50), Wireless Network Interface Kit (IB-51) or

Wireless Network Interface Kit (IB-36) has been installed.

Parallel I/F

is only displayed when the optional Parallel Interface Kit (IB-32B) has been installed.

Summary of Contents for P-4531DN

































































































































































































































































































































































Search results

Summary of Contents for P-4531DN

Reviews:

Related manuals for P-4531DN

Brands by name

Popular brands

Utax P-4531DN, Operation Manual

Search results

Summary of Contents for P-4531DN

Reviews:

Related manuals for P-4531DN

Brands by name

Popular brands