Utax P-4531DN, Operation Manual

Page: 124 / 352

Operation Panel
4-46
Paper Feed Mode (Setting the paper feed source)
This mode specifies how the paper should be fed once the paper feed source and paper type have been chosen. If
Auto
is selected, the printer searches for a paper feed source that matches the paper size and type, and paper is then delivered
from that source. If
Fixed
is selected and there is no matching paper feed source, handling proceeds as specified by
Paper
Mismatch
for
Error Handling
. For details on paper feeding when
Fixed
is selected, refer to Paper Mismatch (Detection
settings for paper size/type errors when the paper source is fixed) on page 4-104 . To change the settings, follow the steps
described below.
1
In the
Print Settings
menu, press

or

to select
Paper Feed
Mode
.
2
Press [OK] . The
Paper Feed Mode
screen appears showing the
available paper feed options.
3
Press

or

to select the desired paper feed mode.
4
Press [OK] . The paper feed mode is set and the
Print Settings
menu reappears.
Duplex (Setting the duplex printing)
Using the duplexer, you can automatically print on both sides of the paper.
Duplex printing is available for the following paper (media) types:
Plain
Preprinted
Bond
Recycled
Rough
Letterhead
Color
Prepunched
High Quality
Custom 1
to
8
Paper Feed Mode:
Auto 01
Fixed 02
*
Note
Duplex printing can be also performed from the MP tray. If the paper to be fed from the MP tray does not
match the paper size and paper type of the current paper feed source cassette, a paper jam may occur.
When
Custom
is specified, duplex printing can be set. For details, refer to Custom Paper Settings on page 4-40 .