manualshive.com logo in svg

Utax CA-3100, Service Manual

Share
Download
Utax CA-3100 Service Manual Download Page 36

2-8

Installation 

＞

 Installing the main unit

[CONFIDENTIAL]

(5) Loading Paper

(5-1)Precaution for Loading Paper

Before loading paper in the cassette, fan the paper taken from a new package to separate it in the procedures below.

Fan the paper and align the edges at the flat place.
In addition, note the following points.

• If the paper is curled or folded, straighten it before loading. Such paper may cause a jam.

• If paper is left under high temperature and high humidity after taking it out of the package, it may cause trouble with 

paper absorbing moisture. After setting paper in the cassette, seal the rest of the paper in the paper storage bag. 
Also, seal the paper remaining on the MP tray in the paper storage bag.

• If paper is left in the cassette for a long period, heat from the cassette heater may discolor it.

• If the machine will not be used for a prolonged period, protect all paper from humidity by removing it from the 

cassettes and sealing it in the paper storage bag.

Important

If you reuse paper already used for printing, remove staples or clips. Do not use paper with a staple or clip. This 
may cause poor image quality or malfunctions.

Summary of Contents for CA-3100
































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands