Utax CA-3100 Service Manual Download

Page: 32 / 287

2-4

Installation

＞

Installing the main unit

[CONFIDENTIAL]

Notes on main unit transportation

Be sure to hold the both side handles at the lower part of the machine when carrying it, as shown in the figure.

(2) Setup of a toner container

Open the top cover (a) and pull the container lable (b) toward you to remove it.

Detaching the toner container

Rotate the toner container lock lever (a) to the lock position (b) and then back to the unlock position (c)

Remove the toner container (a) from the main unit.

Caution

Check the contents of the container label and remove a container.

Summary of Contents for CA-3100































































































































































































































































































Search results

Summary of Contents for CA-3100

Reviews:

Related manuals for CA-3100

Brands by name

Popular brands

Utax CA-3100, Service Manual

Search results

Summary of Contents for CA-3100

Reviews:

Related manuals for CA-3100

Brands by name

Popular brands