USTER HVI SPECTRUM, Instruction Manual, Page: 198 / 230

USTER
® HVI SPECTRUM
Instruction Manual
Uster Technologies, Inc. Chapter 14
Appendix • Page 14-12
2.9
HVI SPECTRUM
Record Formats
The
HVI SPECTRUM
records will be divided into Length/Strength,
Micronaire, Color/Trash, Spinning Consistency Index (SCI), Maturity,
HVI SPECTRUM
Moisture, and
HVI SPECTRUM
NEP Count data sets. The
following describes specific fields.
Note that for the indicated fixed-length fields (xx or xx.xxx for example),
the following applies:
•
Integer fields are left-padded with spaces.
•
Floating-point fields are left-padded with spaces (beyond the “0.”
units representation for values less than one), and right-padded
with 0s. For example 0.32 in a format of “xx.xxx” would transmit
“0.320”.
The standard deviation and CV records are only transmitted for
observation counts of 3 and above. A Mean record is sent if there are 2
or more observations.
For Mean record sets, some data types send a flag for two-sided Retest
and /or a flag for Rejected.
‘R’ is for Retest, ‘n’ is for Not retested; ‘L’
is for a Lot limit that was accepted, ‘n’ for Not a Lot limit.
2.9.1 Length/Strength
01 Individual Observation
Field Description Size/Type
Identifier 40 alphanumerics
Sample Id 12 alphanumerics
Rep #
XX
Total Reps xx
Length x.xxx (inches for English
units) or xx.xx (mm for
Metric units)
Uniformity xx.x
Strength xx.x
Elongation xx.x
Short Fiber Index xx.x