USTER HVI SPECTRUM, Instruction Manual, Page: 173 / 230

USTER
® HVI SPECTRUM
Instruction Manual
2.1 Selecting a Profile
To select a profile, follow the steps below:
1. First, choose the R
UN
item under the Q
UALI
P
ROFILE
menu options
on the Q
UALI
P
ROFILE
MAIN M
ENU
.
2.
The S
ELECT A
P
ROFILE
screen shown on the right is displayed.
3.
Choose a profile from the drop-down list located under Select
Profile .
4.
A Lot Identifier must be
selected to which the profile
will be applied. Make a
selection from the drop-down
list under
Select Lot
Identifier .
5.
The QualiProfile can be
applied to all bales within a
lot or to selected bales within
a lot. Specific bales can be
selected under the
Select
Bale Identifier drop-down
list. (The Bale Identifier will
automatically appear after
you select the Lot Identifier.)
6.
Press the OK button when
you are finished.
Figure 11-5: Select a Profile Screen
Uster Technologies, Inc. Chapter 11
USTER® QualiProfile • Page 11-5