USR IOT RJ45 Page 41 User Manual Download

Page: 41 / 41

Convert Server User Manual

www.usriot.com

Jinan USR IOT Technology Limited

41 / 41

[email protected]

After the Convert Server receives a password, if the password is correct, to the address (Unicast, Port:

48899) sends local IP address and MAC address and name of the Convert Server. (IP, MAC, MID as

10.10.100.254,888 B5D0000E2, guxin).

So you can get to the IP address of the Convert Server.

Appendix

Appendix B

B:::: Contact

Contact

Company:

Jinan USR IOT Technology Limited

Address:

1-728, Huizhan Guoji Cheng, Gaoxin Qu, Jinan, Shandong, China

Tel:

86-531-55507297, 86-531-88826739

Web:

www.usriot.com

Email:

[email protected], [email protected]

Appendix

Appendix C

C:::: Disclaimer

Disclaimer

This document provides information about RS232/RS485 TO RJ45&WIFI CONVERT SERVER, this

document does not grant any license to intellectual property rights. Except the responsibility declared in the

product sale clause, USR does not assume any other responsibilities. In addition, USR does not make any

warranties for the sale and use of this product, including the suitability of the product for a particular purpose,

merchantability or fitness for any patent, copyright or other intellectual property infringement, etc. USR may

make changes to specifications and product descriptions without notice.

Appendix

Appendix D

D:::: Update

Update

Update History

History

2014-01-09

V1.0

created

2014-07-24 V2.0 Increase the HTTPD Client model/serial command mode, modify the GPIO

mode.Increase the TCP password authentication, Keepalive, Websocket, upload ID, adaptive baud rate, etc.

Summary of Contents for RJ45










































Search results

Summary of Contents for RJ45

Reviews:

Related manuals for RJ45

Brands by name

Popular brands

USR IOT RJ45, User Manual

Search results

Summary of Contents for RJ45

Reviews:

Related manuals for RJ45

Brands by name

Popular brands