USR IOT RJ45, User Manual

Page: 23 / 41

Convert Server User Manual www.usriot.com
Jinan USR IOT Technology Limited 23 / 41 tec@usr.cn
Figure
Figure
Figure Figure 8
8
8 8 RFC
RFC
RFC RFC 2217
2217
2217 2217
In this way, the Convert Server of baud rate will be as the USR-VCOM to change at any time, and don't have
to restart the Convert Server.If restart the Convert Server, baud rate and will come back to before.
5.6.4. 5.6.4. 5.6.4. 5.6.4. Keepalive Keepalive Keepalive Keepalive
V4.02.10. USR13 and above version of the firmware added keepalive when the TCP connection mechanism,
so when the Convert Server of network anomalies, timely diagnose abnormal to the network and disconnect,
when the network has resumed after, and just in time to connect to the server.
5.6.5.
5.6.5. 5.6.5.
5.6.5. Multiple
Multiple Multiple
Multiple STA
STA STA
STA parameters
parameters parameters
parameters
This function based on V4.02.10.USR18 and above version of the firmware, in the sta mode, if can network
signal is too low, it will automatically switch to the other AP network (switching network automatically restart).
This feature provides a signal threshold, when the current network signals is lower than the critical value, the
Convert Server of automatic switching network and restart.If the signal value is set to 100, the Convert Server
will not switch network.Even if the current network signal is not the current network will always search, not
heavy to other networks.
The function of the specific Settings page refer to section 4.5.4.
5.6.6.
5.6.6. 5.6.6.
5.6.6. Websocket
Websocket Websocket
Websocket
This Convert Server can realize the function of the websocket server, allowing serial real-time interaction with
the web Convert Server, replace the previous HTTP GET, POST, corresponding faster.This Convert Server
provides the corresponding websocket test page for user testing, specific page is as follows:(web
Page:10.10.100.254/websocketen.html)