CARE AND MAINTENANCE
LIMITED LIFETIME WARRANTY
1. Use a soft, clean cloth that will not scratch the surface while cleaning.
2. Using solvents of any kind on your product may damage the finish.
3. Do not use any harsh abrasives or chemicals to clean any metal surface as it may damage the protective coating.
This product is warranted to the original purchaser. If there is a failure in this unit due to defects in materials or workmanship, the
manufacturer will repair or replace this item at our discretion without charge. Warranty is void if product has been assembled
incorrectly, misused, abused by overloading, altered in any way or damaged due to accident. This warranty is not transferable
and does not cover chipping, flaking, scratches, rust, dents or other damages to the surfaces of this product. Responsibility of the
manufacturer is limited to repair or replacement of this product. The manufacturer is not responsible for consequential, incidental,
or other damages or losses resulting from product failure.
This warranty is in lieu of all other expressed warranties. Some states do not allow the exclusion or limitation of incidental or
consequential damages, therefore, the above limitation may not apply to you. This warranty gives you specific legal rights and you
may have other rights which vary from state-to-state.
4
U.S. Polymers Inc.
1057 S. Vail Ave.
Montebello, CA 90640
United States of America
w w w . d u r a m a x b p . c o m
SKU#68070-1
1
RD-1.0
27-08-2020
Customer Service: 1-888-444-0104 Monday - Friday: 8:00 a.m. - 4:30 p.m. PST
ITEM #68070
IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE
WARNING
Your safety and the safety of others is important to us.
Failure to follow these guidelines can result in property damage or personal injury.
• The product is for outdoor and indoor use.
• We strongly recommend that at least two or more adults move and assemble this unit.
• Please ensure that all steps are completed before fully tightening the screws.
www.duramaxbp.com
1
Ashton Convertible Bench/Table
48 cm 19 in
76 cm 30 in
84 cm
33 in
142 cm
56 in
66 cm
26 in
ASSEMBLY INSTRUCTIONS
Step 5
G
J
How to Convert from Bench to Table / Table to Bench
G x 2
J x 2
Note:
To convert from bench to table and vice versa, press the lever in the direction of the arrows (upwards).
This operation can be done on one side only.
Side View
Lever
