38000-L01-001_Rev_J_SugarCUBE_Manual
14
6.2
Cleaning the LED, Light Guide and Light Guide
Adapter
NOTE:
The light guide adapters are designed to position
selected light guides extremely close to the face of the
LED. Dust and debris must not be allowed to
accumulate on or around the LED or damage to the LED
and/or light guide may occur.
Use isopropyl alcohol sparingly. Excess isopropyl
alcohol may cause damage to the LED.
1.
Flip the Main Power ON/OFF (I/0) switch to the OFF (0) position and
remove the power cord from the unit.
2.
Lightly dampen a clean cotton swab with isopropyl alcohol.
3.
Gently swab the face of the LED glass to remove debris.
4.
Clean around the light guide adapter.
5.
Refer to the manufacturer’s recommended cleaning procedure for
cleaning the light guide conducting surface.
6.
Allow alcohol to completely dry prior to using unit.
7.
Connect the power cord to the unit and flip the Main Power ON/OFF
switch to the ON (I) position.
