Installation
03/19
Fl Protect Set
12
6
Installation
The Fl Protect must be installed in the piping
system by a trained technician according to the installation
instructions.
6.1
Measures before installation
If the operating pressure is greater than 10 bar, a pressure
reducer must be installed upstream of the Fl Protect.
If no filter has been installed in the cold water inlet of the entire
system, it should now be retrofitted to protect the valve from
contamination.
Existing KFR valves, non-return valves or non-return valves
must be tested for function and tightness and replaced if
necessary.
6.2
Installation position
The Fl Protect is always installed upstream of the
pipeline section to be shut off and the consumer.
