SF-2110 User Guide – Rev. A
GPS Anten
The connect
labeled
shown in Figure 8.
Both the GPS antenna port (ANT 1)
and the StarFire™ antenna port
(ANT 2 - SF
5.0VDC, 15
the antenna
powered on.
The system is supplied
cable (P/N 94-310261-3012LF). The cable is fitte
with two straight male TNC connectors.
The cable le
should not e
na Connector
or used on the SF-2110 is a TNC female,
ANT 1
on the rear panel of the sensor as
-2110R only) provide
0mA. Do not disconnect
when the GPS unit is
with 12ft (3.6m) of RG58/U
d
ngth between the antenna and SF-2110
xceed 7dB loss at 1.575GHz for optimum
performa
up to
tellite tracking suffers the most with more
nce, though the system may tolerate
10dB of cable loss with minimal performance. Lower
elevation sa
than 7dB insertion loss.
3-46
* Consult Release Notes on the NavCom web site for availability.
Summary of Contents for SF-2110
