SF-2110 User Guide – Rev. A
Chapter 3 .................................Installation
ardware
installa
Standard Antenna
depth of 16mm (0.63 inch).
This chapter provides guidance on h
tion for optimum performance.
The 5/8 inch BSW threaded antenna mount has a
The BSW insert is secured in-place with an
adhe
and it
l
shock and vi
ainability
characteristics of the antenna mount.
sive,
s remova
bration sust
will change the
Figure 11: Standard GPS/L-band Antenna
Do not loosen or remove the Phillips screws
on the base of the antenna for mounting
purposes. This will VOID the warranty and
compromise the environmental seal of the
antenna, leading to internal damage.
9
Antenna placement is critical to good system
performance. Avoid antenna shading by buildings,
rooftop structures, foliage, hills/mountains, etc.
9
Locate the antenna where it has a clear view of
the sky, to an elevation angle of 7º if possible.
Obstructions below 15º elevation generally are
not a problem, though this is dependent on
satellite availability for the local region.
* Consult Release Notes on the NavCom web site for availability.
3-39
Summary of Contents for SF-2110
