Installation
03/19
Fl Detect Set
10
5.4
Cascading the Set
If required, several water sensors can be used
simultaneously on one Fl! Then order the
Fl Detect Set several times.
Please connect all parts according to figure 4.1.
Plug the I/O connector (4) of the first set into the Fl
connector.
All further sets are then simply connected in series!
The I/O connector (4) of the second set is plugged into the
splinter output (5) of the first set and so on.
If required, a Fl Hub can also be connected last!
Simply plug the I/O connection cable from the Fl Hub
(see Fl Hub instructions for details) into the output (5)
of the last splinter (2).
