www.USconverters.com
USconverters.com
Copyright ©
USconverters.com | Arizona | USA
34
Configuring the parameters
Configuring the UCBT232B/EXA with your own custom settings such a baud rate, data
settings, flow control etc. Please refer to the Serial Adapter’s datasheet for all available
parameters.
The parameters of the adapter can be configured by one of the following ways:
1.
Through the serial RS232 interface
2.
Over Bluetooth
Configuring the parameters through the serial interface
Configuring the parameters through the serial interface is the easiest way.
If you do not have a built-in serial COM port available in your computer we recommend
using ourfully compatible with the adapter. We cannot guarantee compatibility with other adapters.
1.
Connect the UCBT232B/EXA to your computer either directly to a COM port, or
if you computer does not have a COM port use a USB to Serial RS232 adapter.
2.
If you are using a USB to Serial adapter first install the required drivers for the
adapter and make sure that a virtual COM port has been successfully created.
3.
Connect the UCBT232B/EXA to the power supply and connect the
UCBT232B/EXA’s COM port to the USB serial adapter (or your computer’s
COM port).
4.
If you are using a USB serial adapter check in Windows Device Manager which
COM port has been assigned to your adapter, in this case COM port 5.
