www.usconverters.com
1
USconverters.com
Copyright © All rights reserved
Setup guide for EZ50B and EZ500B serial RS232 RF Radios
Establishing a link
Verifying communication
Configuring the parameters
Establishing a link in a test setup
Before connecting the serial radios to your equipment we strongly recommend you to
become familiar with the radios by making a test setup. This will also verify that the radios
are correctly setup and can communicate properly.
1. To make a test setup we need to connect two EZ50B radios to a PC as shown below. In
this example, our PC has one native serial COM port for connecting one EZ50B radio so
we need to use a USB to serial adapter for connecting the second radio to the PC; so in
this example a total of three USB ports are required to make this test.
