- 17 -
Remove the top cap, the pen and the spring. Replace the pen and/or spring as necessary. Slide the spring
onto the pen from the top and insert it back into the pen carriage.
Replace the carriage cap and screw into place.
Once you are ready to make cuts with the LaserPoint you can attach the blade carriage.
Installing a New Blade
Unscrew the cap
from the Blade
carriage.
Remove the
protective cover
from a new blade.
Insert the blade
into the top of the
Blade carriage.
Screw the cap back
onto the blade
carriage.
Adjust the carriage
cap until the blade
is protruding
approximately
1/64
th
of an inch.
