Ursalink UG65 Quick Start Guide
www.ursalink.com
19
7. Network Server Configuration
UG65 can work as network server and transmit data to Ursalink Cloud or other platform via
MQTT/HTTP/HTTPS.
Make sure the gateway connects to the network as shown in
.
7.1 Connect UG65 to Ursalink Cloud
A. Go to “Packet Forwarder” → “General” page to enable the “Ursalink” type server.
B. Go to “Packet Forwarder” → “Radio” page to select the antenna transmission type, center frequency and
channels. The channels of the gateway and LoRaWAN nodes need to be the same.
Note:
for built-in antenna models, please select “2
×
Built-in ANT”; for external antenna models, please
select “Ext ANT(TX+RX)+ Built-in ANT(RX)”.
