Ursalink UG65 Quick Start Guide
www.ursalink.com
11
4.2 Web Access via Ethernet Port
Connect PC to UG65 ETH port directly or through PoE adapter. The following steps are based on Windows 10
operating system for your reference.
A. Go to “Control Panel” → “Network and Internet” → “Network and Sharing Center”, then click “Ethernet”
(May have different names).
B. Go to “Properties” → “Internet Protocol Version 4(TCP/IPv4) ”and select “Use the following IP address”,
then assign a static IP manually within the same subnet of the gateway.