EM500-SMT User Guide
10
4.2 EM500 Installation
Ensure the location of EM500 is within the communication range of LoRaWAN gateway.
4.2.1 Wall Mounting
1. Attach the mounting bracket to the wall and drill. (Around 16mm)
Note:
The connecting line of two holes must be a horizontal line.
2. Mount the device on the wall.
4.2.2 Pole Mounting
1. Loosen the hose clamp by turning the locking mechanism counter-clockwise.
2. Straighten out the hose clamp and slide it through the rectangular holes in the mounting
bracket, wrap the hose clamp around the pole.
3. Use a screwdriver to tighten the locking mechanism by turning it clockwise.
4.2.3 DIN Rail Mounting
Use 2 pieces of M3 × 6 flat head Phillips screws to fix the DIN rail to the device, and then hang
the DIN rail on the mounting bracket. It is necessary to choose a standard bracket.
