80
DS1375-020E
12.9.1.2 ANALOGUE USER TERMINAL SUPPORT, IP/SIP, THIRD-PARTY SOFTWARE
iPerTAlk complies with the SIP standard, so it also allows you to manage third-party devices, as long as they
comply with the SIP RFC3261 standard.
The service requires the activation of a licence for
Generic extensions Ref. 1375/32x
.
To configure a third-party IP/SIP type terminal, create a “SIP Extension” gateway and replicate the configurations
present in the IP/SIP terminal to be managed, refer to the relevant configuration manual.
Access the
Extensions
section (System
→
Advanced Configuration
→
Extensions, press the key
) and
select the Gateway Type:
Audio SIP Extension
or
Video SIP Extension
.
Below is the description of the following parameters:
1.
Telephone name:
enter the telephone name (e.g.: device00 or another name, lowercase characters and
numbers without spaces are permitted).
2.
Telephone address:
enter the same name entered in the Telephone Name field.
3.
System address:
enter the IP address with which the iPerTAlk is reached from the network to which the
device is connected (telephone network address or WAN network address).
The remaining fields should be filled in according to particular needs.
4. Press the key
to confirm the configuration.
By accessing the advanced configurations present in the page for setting the gateway, it is possible to further
customise the device configuration:
Summary of Contents for iPerTAlk 1375
Page 98: ...98 DS1375 020E...
Page 99: ...99 DS1375 020E...
