DS1741-004
51
–
Recording Time
, i.e. the max duration of the audio/video message (between 10 and 20 seconds).
–
Audio Message
, i.e. the personalised audio message that is played at the outdoor calling station
when video door phone voicemail is activated.
–
Play Audio Message
allows the audio message to be enabled or disabled when the video door
phone voicemail is active. If it is disabled no message will be played at the outdoor calling station.
–
Play Beep
, to enable or disable the beep sound at the end of the audio message (if you disable the
audio message the beep will also be automatically disabled).
Tap the setting that you wish to change. According to the chosen setting, a pop-up window will open
where you can:
– Edit the recording time of the audio message.
– Record and replay the existing audio message. A new message will overwrite the existing one. The
icon
can be used to delete the existing message.
– Enable or disable playing of the audio message (disabling does not delete the existing message,
which can be re-enabled later on).
– Enable or disable the end beep.
4.2.4.3 Call divert settings
To activate or change the settings for the call diversion function, follow the procedure below:
•
Press the
Device Mode Settings
parameter and then select
Call divert settings
.
•
The screen with the various function settings listed is displayed (the status of each setting is shown
to the right):
–
When absent, divert call to:
if set, this parameter allows selecting which device to divert a call to:
- relevant exchange,
- all the exchanges in the system,
- a contact in the directory.
ATTENTION!
It is possible to divert the call only to a video door phone in the contact directory.
–
Waiting time before divert:
if set, this parameter allows setting the waiting time within which the call
will be diverted (from 10 to 50 seconds or immediately).
–
Automatic divert when busy:
if set, this parameter allows diverting the call if the video door phones
in the apartment are busy with another call.
4.2.4.4 Call forwarding settings
The following parameter allows enabling the call forwarding function to receive a call on one or more
smartphones/tablets.
•
Press the
Device Mode Settings
parameter and then select
Call forwarding settings
.
•
The screen with the various settings and parameters of the function is displayed.
