10
DS1741-004
2.
USING THE DEVICE AS VIDEO DOOR PHONE TERMINAL
The Video Door Phone application is the main application of the IP 1741/1 Video door phone and it is also
the default Home Page. The application turns the device into an advanced video door phone terminal.
2.1 HOW TO ANSWER AN EXTERNAL CALL
When the Video door phone receives an outdoor door phone video call, it rings and the screen lights up
from its default switched-off state. The video door phone will show the image of the caller on the display.
If there are more than one video door phone in the apartment when a call is received, only the Master
video door phone will display the caller’s image. To view the caller’s image on a Slave video door phone,
press “
Touch to view who is calling you
” on the video door phone display.
By tapping the various icons you can:
Reject the call. If the external calling station is a call module, a message is displayed informing
that the call has been rejected.
Answer the call and begin a hands-free conversation.
Open the door.
Open a driveway or garage gate.
Take a snapshot of the image displayed on the screen.
Enlarge or shrink the image, also changing its format from 4:3 to 16:9
Turn the Video door phone microphone off and then back on, to prevent the caller hearing what
you are saying. When the microphone is turned off, the corresponding icon is crossed out. The
icon is only displayed after the call has been answered.
Activate an auxiliary function, e.g. turning on the stair lights. Tapping the icon opens a pop-up
window that lists the possible controls. The icon is only displayed if the Ipercom system inclu-
des a correctly programmed special decoding function (for more information see the Ipercom
technical manual on www.urmet.com).
Close the call. The icon will only be active after the call has been answered.
Change the audio volume in the outdoor station-to-Video door phone direction (Video door phone
speaker).
