urmet domus Elkron C420, Installation Manual

Page: 24 / 28

24 C420 Installation Manual
6.5 SUPERVISED SIREN OUTPUT
Siren output
Output voltage
24V
⎓
End of line resistor 3300 Ω
Max available current 500mA
Protection fuse (F2) 5x20 – 250V F500mA
6.6 SUPERVISED SIREN OUTPUTS – MR420
Siren outputs
Output voltage
24V ⎓
End of line resistor 3300 Ω
Max available current 250mA
Protection circuit Internal - restorable
6.7 FIELD OUTPUT
Field outputs
Output voltage
24V
⎓
Output voltage when the AC mains is missing and the
resistance of batteries is high
22.3V ⎓
Output drop and control panel turn off voltage
18,5V
⎓
Max ripple on the output voltage 17mV
Max available current 1A
Protection fuse (F1) 5x20 – 250V F1A
6.8 RELAY OUTPUTS
Fault/programmable relay output
Type of contact Dry contacts
Max voltage
30V ⎓
Max current 1A resistive load
Alarm/siren/zone relay output (
1
)
Type of contact Dry contacts, NO/NC type selectable via jumper
Max voltage
30V ⎓
Max current 1A resistive load
(
1
) The information reported in the table also applies to the zone relays available on the ML420 module.
6.9 DISTRIBUTION OF CONSUMPTIONS
Distribution of consumptions (4A max)
Current drawn by the boards of the control panel 160mA nom. / 230mA max
Current drawn by each ML420 module 45mA nom. / 80mA max
Current drawn by the MR420 module 20mA nom. / 50mA max
Current drawn by the RS232/485 board 20mA
Current available at the field output 1A
Current available at the supervised siren output 500mA
Current for battery recharge 500mA
Current available at each detection circuit for the
conventional points
40mA
Current available at each supervised siren output of the
MR420 module
250mA
Symbol Description
Direct input voltage
See the installation manual of the device