36
DS1092-132
PRIVACY – MASKING ONE OR MORE ZONES OF THE SCENE
The PRIVACY function allows to define up to eight privacy zones that mask specific areas. A privacy zone
is displayed on the monitor as a rectangle, with dimensions, colour and transparence level previously set
by the user.
REMARKS ON PRIVACY ZONE
•
It is suggested to use privacy zones lightly bigger than areas to be masked.
•
Privacy zones can only be rectangular.
Select this option to activate (ON) the privacy zones and access the following submenu.
PRIVACY
AREA
SEL.
AREA1
AREA
STATE
ON
HEIGHT
■■■■■■█■■
032
WIDTH
■■■■■█■■■
032
LEFT/RIGHT
■■■█■■■■■
020
TOP/BOTTOM
■■■■■■█■■
016
COLOR
■■■■█■■■■
000
RETURN
RET
Option
Value
Description
AREA SEL
AREA1 ÷ AREA8
This option allows to select one of the 8 available areas
(see below)
AREA STATE
ON ÷ OFF
This option allows to enable (ON) or disable (OFF) the
selected area)
HEIGHT
000 ÷ 010
It allows to change the height of the selected area.
WIDTH
000 ÷ 010
It allows to change the width of the selected area.
LEFTH/RIGHT
000 ÷ 015
It allows to move the selected area horizontally.
TOP/BOTTOM
000 ÷ 013
It allows to move the selected area vertically.
COLOR
000 ÷ 015
It allows to select one of the 15 available colours to fill the
previously selected area.
RETURN
RET
It allows to quit the submenu.
AREA SEL – AREA SELECTION
By selecting this option, 8 privacy zones are displayed. It is possible to define the number of areas to be
displayed on the screen and the size of each single area.
Press the button on the camera front to perform all desired changes.
To quit the menu, keep the button pressed for some seconds.