urmet domus 1072/17, Manual

Page: 19 / 72

19
DS107-035
10. Not.used.
11. Extractable. connection. terminal. boards. (MP,.
MV1,.MS1).
12 Adjustable LCD contrast.
13. Extractable.connection.terminal.board.(MP1).
DESCRIPTION OF TERMINALS AND
CONNECTORS
MP1 terminal board
~0 Power 12Vac
~12 Power 12Vac
+T Back-up power positive
GND Back-up power negative
SE1.. Electrical.lock.connection.
SE.. Electrical.lock.connection.
MP2 terminal board
L1 Bus line 1st wire
L2 Bus line 2nd wire
GND.. Reference.electrical.earth.
PA.. Hall.door.opener.button.input.
SP.. Open.door.sensor.contact.input.
MV1 terminal board
SN Video power unit on signal for video systems
R Video switching enable signal for video systems
R1 Video power earth
MS1 terminal board
H.. Door.opener.code.time.band.contact.input.
P.. Mail.key.input.
GND.. Reference.electrical.earth.
+EP Auxiliary device power
DT.. Not.used.
CNA.. Not.used
CNP.. Programming.keyboard.connector.103/65
CNS.. PC.serial.line.connector.
TECHNICAL SPECIFICATIONS
Power: 12Vac nominal
Stand-by.consumption:... 300mAac.max.
Maximum.consumption:.. 600mAac.max..
R.signal:.. . Imax.=.80mA
Lock.hold.current:.. . 190mA.max.
Working.temperature.range:..-10.+50°C
Humidity:.. . 90%.RH.@.30°C
INSTALLATION
Refer. to. the. “technical. manual”. for. instructions. for.
installing.the.call.module..The.module.is.programmed.
by default with a jumper between the earth and the
“SP”. signal. to. simulate. the. door. closed. contact..
Remove the jumper and connect the sensor between
GND and SP when the open door contact is required.
Connect.the.electrical.lock.positive.to.terminal.SE1.
and the negative to terminal SE2 when polarised
electrical.locks.are.used..
L2
~0
~12
+T
SE1
SE2
GND
SP R1 R SN PA GND
MP2 MV1 MS1
L1 H DT +EP GND P
Sch./Ref. 1072/17
Data:....................
CONTR.
MP1
13
12
11
10